Order entry quiz
25 questions on the 2026 exam outline. You see the answer and the reason after each one.
Your result
0 of 25 correct
By content area
- Order Entry and Processing
1. Order Entry and Processing
A patient injects 24 units of U-100 insulin per dose. Which syringe is the smallest that holds the full dose, and what volume does the dose equal?
U-100 insulin contains 100 units per mL, so 24 units ÷ 100 units/mL = 0.24 mL. A 0.3 mL insulin syringe holds up to 30 units and is the smallest size that fits the dose, giving the most precise measurement. The 0.5 mL (50-unit) and 1 mL (100-unit) syringes are larger than needed.
Outline task 4.2: Equipment and supplies for drug administration
2. Order Entry and Processing
A prescriber orders a spacer (valved holding chamber) for a child. With which type of device is a spacer used?
A spacer attaches to a pressurized metered-dose inhaler and holds the spray so the patient can breathe it in without perfectly timing the puff, which gets more drug into the lungs. Dry powder inhalers are breath-activated and are not used with a spacer. Nasal sprays and pen injectors do not use one at all.
Outline task 4.2: Equipment and supplies for drug administration
3. Order Entry and Processing
A technician pulls several expired stock bottles, including an expired controlled substance, from the shelves. Which type of company typically takes this stock to process manufacturer credit and arrange proper disposal?
A reverse distributor receives expired or otherwise unsalable drugs, obtains credit from manufacturers where available, and arranges compliant destruction; one registered with the DEA may also take controlled substances. A pharmacy benefit manager processes claims, and a group purchasing organization negotiates purchase contracts. A third-party logistics provider stores and ships saleable product.
Outline task 4.4: Returning dispensable, non-dispensable and expired stock
4. Order Entry and Processing
A manufacturer's stock bottle is labeled "EXP 08/2027" with no day given. Through which date may the product be dispensed, as long as the patient will finish it by then?
When an expiration date shows only a month and year, the product is good through the last day of that month, here August 31, 2027. August 1 is a common mistake that would discard usable stock a month early. July 31 and August 15 have no basis in the labeling rules.
Outline task 4.3: Lot numbers, expiration dates and NDC numbers
5. Order Entry and Processing
Two days after pickup, a patient brings back a sealed vial of tablets and says the prescriber stopped the drug. What may the pharmacy do with these tablets?
Once a medication has left the pharmacy's control, its storage conditions and integrity can no longer be assured, so it must not be returned to stock or dispensed again. An intact seal or a visual inspection cannot prove how the tablets were stored. Prescriptions that were never picked up are different, because they never left the pharmacy.
Outline task 4.4: Returning dispensable, non-dispensable and expired stock
6. Order Entry and Processing
A prescription for divalproex sodium 250 mg delayed-release tablets reads: take 1 tablet every morning and 2 tablets at bedtime. The quantity written is 90 tablets. What is the days supply?
The patient takes 1 + 2 = 3 tablets per day. 90 tablets ÷ 3 tablets per day = 30 days. Forty-five days counts only the 2 bedtime tablets, and 90 days counts only 1 tablet per day.
Outline task 4.1: Calculations, conversions, Sig codes and abbreviations
7. Order Entry and Processing
A prescription reads: cyclobenzaprine 10 mg, 1 tab po tid x 14 days. How many tablets should be dispensed?
The abbreviation tid means three times daily. 1 tablet × 3 times per day × 14 days = 42 tablets. Twenty-eight tablets would be twice daily (bid) and 56 tablets would be four times daily (qid).
Outline task 4.1: Calculations, conversions, Sig codes and abbreviations
8. Order Entry and Processing
A child weighing 44 lb is prescribed an antibiotic at 20 mg/kg/day divided into two equal doses. How many milligrams are in each dose? (1 kg = 2.2 lb)
Convert the weight: 44 lb ÷ 2.2 lb/kg = 20 kg. Daily dose: 20 kg × 20 mg/kg/day = 400 mg/day. Each of the two doses is 400 mg ÷ 2 = 200 mg. The 440 mg and 880 mg answers come from using pounds instead of kilograms.
Outline task 4.1: Calculations, conversions, Sig codes and abbreviations
9. Order Entry and Processing
A technician is putting away an order of famotidine 20 mg tablets. The bottles on the shelf expire 02/2027 and the new bottles expire 08/2028. Where should the new bottles go?
Stock is rotated so the product that expires first is used first, which means the shortest-dated bottles stay in front and newer stock goes behind them. Placing new stock in front leaves older bottles to expire on the shelf. Quarantine is for expired, recalled, or damaged product, not for good stock.
Outline task 4.4: Returning dispensable, non-dispensable and expired stock
10. Order Entry and Processing
A filled prescription billed to insurance has gone unclaimed past the pharmacy's will-call time limit. Besides returning the medication to stock according to pharmacy policy, what else must be done?
The plan was billed for a prescription the patient never received, so the claim must be reversed when the medication is returned to stock. DEA Form 41 documents destruction of controlled substances, MedWatch is for adverse events and quality problems, and reverse distributors handle expired or unsalable product.
Outline task 4.4: Returning dispensable, non-dispensable and expired stock
11. Order Entry and Processing
How many milliliters of a 20% stock solution are needed to prepare 250 mL of a 4% solution?
Use C1 × V1 = C2 × V2: 20% × V1 = 4% × 250 mL. V1 = (4 × 250 mL) ÷ 20 = 50 mL of stock solution, diluted with enough diluent to make 250 mL. The 200 mL figure is the amount of diluent added, not the amount of stock.
Outline task 4.1: Calculations, conversions, Sig codes and abbreviations
12. Order Entry and Processing
The wholesaler delivers an unopened, in-date bottle of a noncontrolled medication that the pharmacy ordered by mistake. What is the usual way to recover its cost?
Unopened, in-date, salable product ordered in error is normally returned to the wholesaler for credit under the wholesaler's return policy. Reverse distributors process expired or otherwise unsalable product, take-back bins are for patients' unwanted medications, and DEA Form 222 applies only to Schedule I and II drugs.
Outline task 4.4: Returning dispensable, non-dispensable and expired stock
13. Order Entry and Processing
A prescription for a liquid laxative reads "1 tablespoonful by mouth twice daily for 8 days." What total volume is needed to fill it?
1 tablespoonful = 15 mL. 15 mL x 2 doses per day = 30 mL per day, and 30 mL x 8 days = 240 mL. 80 mL results from using a teaspoonful (5 mL) by mistake, 120 mL counts only one dose per day, and 480 mL doubles the correct amount.
Outline task 4.1: Calculations, conversions, Sig codes and abbreviations
14. Order Entry and Processing
A prescription for cefdinir 250 mg/5 mL oral suspension reads: 1 tsp po bid. The pharmacy dispenses a 100 mL bottle. What is the days supply?
One teaspoonful is 5 mL and bid means twice daily, so the patient uses 5 mL × 2 = 10 mL per day. 100 mL ÷ 10 mL per day = 10 days. Twenty days results from counting only one dose per day.
Outline task 4.1: Calculations, conversions, Sig codes and abbreviations
15. Order Entry and Processing
A patient is starting insulin supplied in a prefilled disposable pen. Which supply does the patient need in order to inject a dose from the pen?
A new disposable pen needle is attached to an insulin pen for each injection. Filter needles are used to draw medication from glass ampules, oral syringes measure oral liquids, and lancets prick the finger for blood glucose testing.
Outline task 4.2: Equipment and supplies for drug administration
16. Order Entry and Processing
A pharmacy compounds an ointment and labels it with the date after which it must not be used. What is this pharmacy-assigned date called?
A beyond-use date (BUD) is assigned by the pharmacy to a compounded or repackaged preparation and is counted from the day it is prepared. An expiration date is set by the manufacturer from stability testing of the unopened commercial product. A BUD may never be later than the expiration date of any ingredient used.
Outline task 4.3: Lot numbers, expiration dates and NDC numbers
17. Order Entry and Processing
A stock bottle shows a 10-digit NDC in the 5-3-2 format: 12345-678-90. How is this NDC written in the 11-digit 5-4-2 format used for billing?
To convert a 10-digit NDC to the 11-digit 5-4-2 format, a leading zero is added to whichever segment is one digit short. Here the product segment has three digits, so 678 becomes 0678. A zero is never added to the end of a segment, and the digits are never shifted between segments.
Outline task 4.3: Lot numbers, expiration dates and NDC numbers
18. Order Entry and Processing
When stocking a new shipment, a technician finds that the new bottles expire later than the bottles already on the shelf. How should the stock be arranged?
Stock is rotated so that the product expiring soonest is placed in front and used first (first expired, first out), which reduces waste from outdated drugs. Putting longer-dated stock in front lets older stock expire, and in-date bottles do not need to be destroyed.
Outline task 4.4: Returning dispensable, non-dispensable and expired stock
19. Order Entry and Processing
Why are oral syringes, rather than hypodermic syringes, used to measure liquid medications that are taken by mouth?
Oral syringes are designed so they cannot attach to a needle or a Luer IV connection, which prevents an oral liquid from being injected by mistake. They are not sterile, and they are marked in milliliters, the preferred unit for oral liquid dosing.
Outline task 4.2: Equipment and supplies for drug administration
20. Order Entry and Processing
What is the main purpose of the lot number printed on a manufacturer's stock bottle?
A lot number identifies one manufacturing batch, which lets a manufacturer, FDA, and the pharmacy trace and remove affected product during a recall. The labeler, product, and package size are identified by the NDC, and the last date of use is the expiration date.
Outline task 4.3: Lot numbers, expiration dates and NDC numbers
21. Order Entry and Processing
Which diluent contains an antimicrobial preservative such as benzyl alcohol?
Bacteriostatic water for injection contains a preservative, usually benzyl alcohol, that slows bacterial growth so a vial can be entered more than once. Sterile water for injection, sterile water for irrigation, and dextrose 5% in water contain no preservative.
Outline task 4.2: Equipment and supplies for drug administration
22. Order Entry and Processing
How many milligrams of active ingredient are in 30 mL of a 1:1000 (w/v) solution?
A 1:1000 w/v solution contains 1 g in 1000 mL, which is 1000 mg in 1000 mL, or 1 mg per mL. 30 mL × 1 mg/mL = 30 mg. The other choices come from misplacing the decimal point.
Outline task 4.1: Calculations, conversions, Sig codes and abbreviations
23. Order Entry and Processing
A technician repackages tablets from a manufacturer's stock bottle into unit-dose packaging. Which statement correctly distinguishes the two dates involved?
An expiration date is determined by the manufacturer from stability testing of the product in its original container. A beyond-use date is assigned by the pharmacy when a drug is repackaged, compounded, or dispensed, and it can never be later than the manufacturer's expiration date.
Outline task 4.3: Lot numbers, expiration dates and NDC numbers
24. Order Entry and Processing
A prescription is written for 100 blood glucose test strips with the directions "test four times daily." What days supply should be entered?
Each test uses one strip, so the patient uses 4 strips per day. 100 strips / 4 strips per day = 25 days. 50 days would be correct for testing twice daily, and 30 days is a default that does not match the quantity and directions.
Outline task 4.2: Equipment and supplies for drug administration
25. Order Entry and Processing
A National Drug Code is made up of three segments. What does the middle segment identify?
The first NDC segment is the labeler code, the middle segment is the product code (specific drug, strength, and dosage form), and the last segment is the package code. The lot number is a separate identifier and is not part of the NDC.
Outline task 4.3: Lot numbers, expiration dates and NDC numbers