Pharm Tech Test

Patient safety

Free PTCE study guide for Patient Safety and Quality Assurance: high-alert drugs, look-alike names, error-prone abbreviations, reporting and hygiene.

Patient Safety and Quality Assurance is domain 3 of the PTCE content outline and carries 23.75% of the exam. It has six areas. Most of it comes down to one question: what could go wrong here, and what stops it?

High-alert and look-alike/sound-alike medications

Area 3.1 covers the drugs where a mistake hurts the most and the drug names that get mixed up.

A high-alert medication is not more likely to be involved in an error. It is more likely to cause serious harm when an error happens. The Institute for Safe Medication Practices (ISMP) publishes the lists. Classes to know:

  • Insulin, all types
  • Anticoagulants, such as warfarin and heparin
  • Opioids
  • Concentrated electrolytes for injection, such as potassium chloride concentrate
  • Chemotherapy
  • Neuromuscular blocking agents, which paralyze the breathing muscles
  • Methotrexate taken by mouth for non-cancer use

Three traps worth remembering:

  • U-500 insulin is five times as concentrated as U-100. The same volume holds five times the dose.
  • Methotrexate for conditions like rheumatoid arthritis is taken once a week, not once a day. Daily directions on a methotrexate prescription go to the pharmacist.
  • Pediatric liquids can come in more than one concentration. Check the mg per mL on the stock bottle every time.

Look-alike/sound-alike pairs

Tall Man lettering puts the part of the name that differs in capitals, so your eye catches it.

Drug 1 Drug 2 What they are
hydrOXYzine hydrALAZINE antihistamine vs. blood pressure drug
buPROPion busPIRone antidepressant vs. anti-anxiety drug
cloNIDine clonazePAM blood pressure drug vs. benzodiazepine
glipiZIDE glyBURIDE two different sulfonylureas for diabetes
predniSONE prednisoLONE two different corticosteroids
traMADol traZODone pain reliever vs. antidepressant
metFORMIN metroNIDAZOLE diabetes drug vs. antibiotic
CeleBREX (celecoxib) CeleXA (citalopram) anti-inflammatory vs. antidepressant
ZyrTEC (cetirizine) ZyPREXA (olanzapine) antihistamine vs. antipsychotic
LaMICtal (lamotrigine) LamISIL (terbinafine) seizure drug vs. antifungal

Pharmacies also store look-alike products apart from each other and keep high-alert drugs in clearly marked spots.

Error prevention strategies

Area 3.2 covers the habits and tools that catch mistakes before they reach the patient.

Leading and trailing zeros

  • Always use a leading zero before a decimal point: write 0.5 mg, never .5 mg. Without the zero, the decimal point can be missed and read as 5 mg.
  • Never use a trailing zero after a decimal point: write 5 mg, never 5.0 mg. With the zero, a missed decimal point reads as 50 mg.

Both mistakes produce a tenfold error.

Error-prone abbreviations

Do not write Can be misread as Write instead
U 0, 4 or cc units
IU IV or 10 international units
QD QID (four times daily) daily
QOD QD or QID every other day
MS, MSO4 magnesium sulfate morphine sulfate
MgSO4 morphine sulfate magnesium sulfate
cc U (units) mL
μg mg mcg
AD, AS, AU OD, OS, OU (the eye versions) right ear, left ear, each ear
OD, OS, OU AD, AS, AU (the ear versions) right eye, left eye, each eye
HS half-strength or bedtime half-strength, or at bedtime
SC, SQ SL, or “5 every” subcut or subcutaneously

You still need to read these abbreviations, because prescribers keep writing them. If one is unclear, ask the pharmacist. Do not guess.

Other tools

  • Two patient identifiers, usually full name and date of birth, at drop-off and pickup. An address works as a backup. A room number does not count.
  • Barcode scanning and NDC verification: match the NDC on the stock bottle to the NDC on the label before you count.
  • Read-back of verbal orders: write it down, read it back, get confirmation.
  • Shelf separation and warning tags for look-alike products and strengths.
  • Indication on the prescription: knowing what the drug is for helps catch a wrong-drug mix-up.
  • Independent double check: a second person checks the work without being told the expected answer first.

Issues that require pharmacist intervention

Area 3.3 covers the line between technician tasks and pharmacist tasks. A technician collects information and prepares the prescription. Anything that needs clinical judgment goes to the pharmacist.

Hand these off:

  • Drug utilization review (DUR) alerts on the screen: interactions, allergy conflicts, therapeutic duplication, dose too high or too low. Do not override them yourself.
  • A patient asking which over-the-counter product to take, or whether it is safe with their prescriptions.
  • Questions about side effects, what a drug is for, or what to do after a missed dose.
  • Counseling on new prescriptions. You may ask whether the patient has questions for the pharmacist. You may not do the counseling.
  • Therapeutic substitution, meaning a switch to a different drug in the same class.
  • Early refill requests for controlled substances and other signs of misuse.
  • Adherence concerns, such as a blood pressure drug refilled weeks late.
  • A patient reporting a reaction to a drug or a vaccine.
  • A dose that looks wrong.

You can spot a wrong dose with a quick calculation. Example: a child’s amoxicillin label reads 25 mL per dose, and the bottle is 250 mg per 5 mL.

  • 250 mg ÷ 5 mL = 50 mg per mL
  • 25 mL × 50 mg per mL = 1,250 mg per dose

That is far above a usual single dose for a small child. A dose of 2.5 mL would be 125 mg, exactly ten times less. A slipped decimal is the likely cause. You do not fix it. You bring it to the pharmacist.

Event reporting procedures

Area 3.4 covers where errors and adverse events get reported and how pharmacies learn from them.

Program Run by Report this
MedWatch FDA Serious adverse drug events, product quality problems and problems with medical devices
VAERS CDC and FDA Adverse events after a vaccine
ISMP MERP ISMP Medication errors and near misses, reported confidentially

Terms to know:

  • Near miss: an error that was caught before it reached the patient. Still worth reporting.
  • Root cause analysis (RCA): looking back after an error to find why it happened.
  • Failure mode and effects analysis (FMEA): looking ahead at a process to find where it could fail, before anything goes wrong.
  • Continuous quality improvement (CQI): the ongoing cycle of tracking errors, changing the process and checking again.
  • Sentinel event: an unexpected event causing death or serious harm.
  • Just culture: staff are encouraged to report errors without fear of punishment for honest mistakes. The focus is on fixing the system. Reckless behavior is still held accountable.

Types of prescription errors

Area 3.5 covers how errors are classified. Scenario questions describe what happened and ask you to name the error type.

  • Wrong drug: tramadol filled for a trazodone prescription.
  • Wrong dose or strength: 50 mg tablets instead of 25 mg.
  • Wrong quantity: 30 dispensed when 90 was written.
  • Wrong patient: the right prescription handed to the wrong person. This is what two identifiers prevent.
  • Wrong route: ear drops labeled for the eye.
  • Wrong dosage form: extended-release filled instead of immediate-release.
  • Wrong directions: the label says twice daily and the prescription says once daily.
  • Wrong time or frequency: a weekly drug labeled daily.
  • Omission: a prescribed drug or dose that never gets filled or given.
  • Expired or deteriorated drug: outdated or improperly stored stock is dispensed.

Tenfold errors deserve extra attention. Compare 0.25 mg and 2.5 mg: 2.5 ÷ 0.25 = 10. One misplaced decimal point gives the patient ten times the dose.

Infection prevention and cleaning standards

Area 3.6 covers hand hygiene, protective equipment and keeping work surfaces clean.

Hand hygiene

  • Wash with soap and water for at least 20 seconds. Cover all surfaces: palms, backs of hands, between the fingers and under the nails.
  • Alcohol-based hand rub should contain at least 60% alcohol. Rub until dry.
  • Hand rub is not a substitute when hands are visibly dirty. Use soap and water.
  • Before sterile compounding, hands and forearms are washed up to the elbows for at least 30 seconds.

Counting trays and counters

  • Clean counting trays and spatulas with 70% isopropyl alcohol regularly.
  • Clean right after counting drugs that commonly cause allergies, such as penicillins and sulfa drugs, and any tablet that leaves powder behind.
  • Hazardous drugs such as chemotherapy get their own dedicated tray.

Sterile compounding basics

  • Garbing moves from dirtiest to cleanest. Shoe covers, hair cover and mask come first, then hand washing, then gown, with sterile gloves last. Follow your facility’s written procedure.
  • The hood where sterile products are made must provide ISO Class 5 air. The lower the ISO number, the cleaner the air.
  • Clean a laminar airflow hood from the cleanest area toward the dirtiest. In a horizontal hood, that means back to front, with overlapping strokes.

Standard precautions

Treat all blood and body fluids as if they were infectious. Wear gloves when contact is possible. Never recap a used needle. Drop it straight into a sharps container, and replace the container before it is overfilled. In the vaccination area, clean hands before each patient and wipe down surfaces between patients.

Practice this domain

Put it to work on the PTCB patient safety quiz.

Common questions

How much of the PTCB exam is patient safety?

Patient Safety and Quality Assurance is 23.75% of the content outline, about 19 of the 80 scored questions.

What does the patient safety domain cover?

Six areas: high-alert and look-alike/sound-alike drugs, error prevention, issues that need the pharmacist, event reporting, types of prescription errors, and infection prevention and cleaning.

Last checked against the PTCB's documents in November 2026.

All practice tests